Rental catalog
The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flown vertical columns of up to twenty-four loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution.
Comes with the D&B Z5300 J flying frame with all the accessories.
Packed with the D&B E7919 J wheelboard for easy transport.
More information about product
The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flown vertical columns of up to twenty-four loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution.
Comes with the D&B Z5300 J flying frame with all the accessories.
Packed with the D&B E7919 J wheelboard for easy transport.
More information about product
The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction
More information about product
The J-INFRA is a cardioid infra subwoofer that can be used to supplement J-Series systems consisting of J8, J12 and J-SUB cabinets. It extends the frequency response of a J-Series system down to 27 Hz and can only be used in ground stacked configurations in conventional left/right setups as well as arranged in an infra subwoofer array. It has two bass reflex chambers containing three 21" drivers, two facing forward in one chamber that are driven from a channel of the D12 amplifier and one facing backwards driven by the other D12 channel. Through this driver setup its cardioid dispersion pattern avoids unwanted energy behind the system and greatly reduces the reverberant field at low frequencies providing highest accuracy in low frequency reproduction.
More information about product
The J-Series loudspeakers are mechanically connected using a BGV C1 compliant three-point suspension system. This consists of the J Flying frame from which the cabinets are suspended using rigging links and pins located on both sides of the front of the cabinets, and a central rear splay link. This J-Series rear splay link allows quick and easy selection of vertical angles between the loudspeakers and are permanently attached to the cabinets. The J Flying frame is a welded steel frame designed to suspend a maximum of twenty-four J8/J12 cabinets, or fourteen J-SUB cabinets.
Our D&B Z5300 flying frame is is equipped with a Taqsas Lap-teq (see below).
More information about product
The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.
More information about product
The V8 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 80° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V8 loudspeakers or combined with V12s and / or with V-SUBs. The V8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.
More information about product
The 3-way passive V7P loudspeaker features two 10“ drivers in a dipole arrangement with a horn loaded 8“ MF driver and a 1.4“ compression driver mounted onto a rotatable CD horn. The innovative horn design for the centrally mounted 8“ MF driver produces a remarkable sensitivity resulting in an exceptional performance in the vocal range. An advanced bass-reflex and venting design delivers an extended LF output with full bandwidth capabilities. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Due to the dipolar arrangement of the LF drivers, broadband dispersion control is maintained down to approximately 350 Hz in the same plane as the dipole.
More information about product
The V-SUB is an actively driven high performance cardioid subwoofer powered by a single amplifier channel. The V-SUB features integrated rigging equipment, and shares the same acoustical and visual design as the V-GSUB, which is intended for ground stacked applications only. It houses two long excursion neodymium drivers, an 18" driver in a bass-reflex design facing to the front and a 12" driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction.
More information about product
V Flying frame for a maximum of twenty four V8/V12 loudspeakers or fourteen V subwoofers.
More information about product
The Q1 is a passive 2-way speaker. The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wave front. Q1 cabinets can be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to twenty cabinets with a fully user and venue defined vertical profile.
Comes with the D&B Z5300 J flying frame with all the accessories.
More information about product
The Q7 is a 75° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q7 with the horn rotated is used to mount the loudspeaker horizontally where space is limited, or the maximum horizontal pattern control is needed and when added to the bottom of J arrays.
More information about product
The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz. The Q10 can be used as a stand-alone full range system or in combination with other Q-Series cabinets ground stacked or mounted on a high stand with the Q Flying bracket. When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz.
More information about product
The Q-SUB is an actively driven low compression bass-reflex speaker fitted with a high excursion 18″ driver. The Q-SUB is mechanically compatible with the Q1 and Q7. Ten sockets in the front grill and side panels for Q-Series rigging components permit use in various combinations, either flown or ground stacked.
More information about product
The Q series flying frame kit can be used to fly the Q1, Q7, Q10 & Q-Sub speakers in line array configuration. The Q-Series cabinets are mechanically connected to the Q Flying frame and subsequent loudspeakers using the Q series rigging sets which attached to both sides of the front & rear of the cabinets.
More information about product
The compact Y12 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output.
More information about product
The compact, 2-way passive Y10P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 110° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation.
More information about product
The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz.
More information about product
The compact, 2-way passive Y7P loudspeaker features two 8” drivers in a dipole arrangement with a 1.4” compression driver mounted onto a rotatable CD horn. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These point source, high performance cabinets offer 75° horizontal directivity controlled down to 500 Hz, matched with a vertical dispersion of 40°. The horn can be rotated by 90° to enable horizontal orientation.
More information about product
Y Flying frame for a maximum of twenty four Y8/Y12/Yi8/Yi12 loudspeakers or ten Y/Yi subwoofers
More information about product
The C7-TOP is a coaxial, full range loudspeaker with a 75° x 40° constant directivity dispersion down to 600 Hz. Its horn loaded 15” low frequency driver, 1.5” exit HF driver and an extended bass response allow use without a subwoofer wherever full range sound and controlled dispersion from a compact cabinet is required
More information about product
The C7-SUB is a bass–reflex design with a large port and a long excursion 18” driver. It has the same footprint as the C7-TOP but is taller, allowing a frequency extension down to 44 Hz and is ideal in a ground stack of two C7-SUBs and a C7-TOP
More information about product
The C4-TOP is a coaxial hornloaded mid / high frequency loudspeaker and its narrow dispersion characteristics of 35° x 35° above 700 Hz allow for clear and intelligible sound reproduction over long distances at very high SPLs. This focusing of sound into a narrow beam is of special benefit in acoustically critical situations.
More information about product
The C4-SUB is a bandpass subwoofer with a rich, punchy sound, specifically designed to match the C4-TOP and extend the C4 frequency response down to 50 Hz. Its cabinet shape, size and flying arrangements are totally compatible with the C3 and C4-TOP.
More information about product
The B22-SUB is a high performance subwoofer designed for ground stacked applications, housing two long excursion 18” drivers built into a bandpass horn cabinet design. With high Sound Pressure Levels and an extended frequency response, the B22-SUB is ideal for any large format sound reinforcement application. When operated in INFRA mode, the B22-SUB can be used to complement other d&b subwoofers by extending the frequency response of the system.
More information about product
The B2 subwoofer with its high output bandpass horn design and extremely high SPL is ideal for extended bass requirements.
More information about product
The E5 is a lightweight 2-way passive loudspeaker using a ferrite LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane, while the cabinet may be mounted in either attitude.
More information about product
The E4 is a lightweight 2-way passive loudspeaker using a neodymium LF driver and a coaxially mounted wide dispersion dome tweeter. It offers a wide symmetrical dispersion pattern in the horizontal and vertical plane while the cabinet may be mounted in either attitude.
More information about product
The E3 is an extremely small and versatile high performance speaker with astonishing sound and excellent headroom. The horn, which may be rotated to give either 90° x 60° or 60° x 90° coverage, has the necessary flexibility in directivity enabling a variety of applications such as delay, infill or distributed sound reinforcement applications. In addition, it can be used as an extremely compact stage monitor. Supplied in pairs complete with speaker stands and rigging kit.
More information about product
The MAX is a 2-way full range loudspeaker with remarkable vocal presence, clarity and high feedback stability. Due to its coaxial design it is an extremely compact low height cabinet with two set-up angles.
More information about product
MAX12, the smallest d&b stage monitor, is a 2-way full range loudspeaker, which due to the coaxial design has a compact, low profile enclosure. It achieves a high SPL and feedback stability with remarkable vocal presence, clarity and neutral, balanced sound.
More information about product
The M6 is a 2-way high performance stage monitor employing an integrated 12” LF and 1.3” exit horn loaded HF coaxial driver design that utilizes neodymium magnets. The constant directivity dispersion of 50° x 80° (h x v), which this unique horn provides, delivers an accurately defined coverage area on stage.
More information about product
The M4 is a 2-way high performance stage monitor employing an integrated 15” LF and 1.3” exit horn loaded HF coaxial driver design that utilizes neodymium magnets. The constant directivity dispersion of 50° x 70° (h x v), which this unique horn provides, delivers an accurately defined coverage area on stage
More information about product
The M2 is a 2-way high performance stage monitor, with a peak sound pressure level of 143 dB. Its design uses a low height cabinet, achieves a constant directivity of 45° x 60° > 600 Hz and significantly raises the feedback stability margin. Together with the cabinets baffle angle of 40° (to floor), the dispersion performance offers a realistic artist listening area starting directly above the cabinet and reaching quite far upstage.
More information about product
The 2 RU four channel D80 amplifier is a high power density amplifier, ideally suited for use in both mobile and installation environments. It contains configurations for all d&b loudspeakers and a linear mode. It incorporates a colour TFT touchscreen, offering quick access to the menu structure, while the rotary encoder can be used for fine adjustment. The front panel and the integrated touchscreen of the D80 amplifier is tilted up for ease of operation when the amplifier is below eye level.
More information about product
The D&B D12 amplifier is a dual channel amplifier incorporating digital signal processors (DSP) to provide loudspeaker specific configurations and functions. It is designed for use with all d&b loudspeakers, has both digital and analog signal inputs as well as link outputs, remote control and monitoring capabilities and sophisticated protection circuits.
More information about product
The D&B D6 amplifier is a dual channel amplifier incorporating digital signal processors (DSP) to provide loudspeaker specific configurations and functions. It is designed for use with D&B loudspeakers and has both digital and analog signal inputs as well as link outputs, remote control and monitoring capabilities and sophisticated protection circuits. A user definable 4-band parametric equalizer and signal delay capability of up to 340 ms are incorporated and can be applied independently to each channel. All of these functions and parameters can be easily accessed and controlled via the LCD in conjunction with the digital rotary encoder or through the D&B Remote network.
More information about product
The two channel amplifiers in the P1200A mainframe can each deliver 600 W into a 4 ohm load and each mainframe can house two controller modules - one per mainframe output. Each output will normally drive up to two cabinets. With E3 cabinets, up to four loudspeakers can be driven per channel.
More information about product
The E-PAC amplifier represents a cost-effective alternative to the D6/D12 for single loudspeaker configurations and multichannel applications. The E-PAC offers; complete signal processing, all necessary protection circuits, D&B load monitoring can provide both LF and HF driver status information within systems containing multiple drivers, even if these drivers are passively crossed over, a signal generator for sine or pink noise, all controls and indicators, a 4-band parametric equalizer, a delay function, All these functions and parameters can be easily accessed and handled via the LCD in conjunction with a digital rotary encoder.
More information about product
The D&B Remote network enables central control and monitoring of a complete D&B loudspeaker system from anywhere in the network, be it from a PC in the control room, at the mix position, or on a wireless tablet PC in the auditorium. This central access to all functions, controls and detailed system information unlocks the full potential of the D&B system approach. It effectively speeds up the execution of various tasks during configuration and offers significant advantages during operation. Extensive monitoring and diagnostics enables detailed examination of the system performance. Control can be undertaken on individual loudspeakers, on multiple groups of loudspeakers or formed into groups that address the complete system.
More information about product
Our D&B Z5300 flying frame (see above) is equipped with a Teqsas Lap-teq.
The LAP-TEQ Clinometer is designed to measure the inclination of a line-array or a cluster of loudspeakers. It consists of two components: The LAP-TEQ sensor module and the LAP-TEQ display module. A red laser pointer diode (0,9mW, 635nm) is attached to the LAP-TEQ sensor module to show the elevation angle. This will help you to aim your line array to the last row of the audience.
More information about product
Metrao Compact, is a compact all in one dB measurement system, full compliant with the new Belgian “Schauvliege” sound law.
More information about product
MaxxBCL's combination of world-class bass enhancement, compression and limiting, plus its rugged construction make it the ideal Master Outs processor for live venues of all shapes and sizes.
- Maxximum Bass
- Maxximum Control
- Maxximum Loudness
More information about product
The LM 44 provides a four input/four output analog configuration that is suited for a variety of system signal processing and routing applications. The LM 44 also provides 8 × 8 AES3 digital I/O and 4 × 8 Dante networked I/O, all with comprehensive signal routing to provide Dante break-in / break-out and failover functionality.
The LM 26 provides a two input/six output analog configuration
More information about product
Mix and record live productions of any size with ease. Avid VENUE | S6L delivers the unmatched processing power and sound clarity artists and engineers rely on to present the best show possible.
More information about product
The CDJ-2000 Nexus is the improved version of the CDJ-2000. The new features that instantly catch the eye are the new display system which incorporates wireless Rekordbox functionality and color-based key indicators. Another welcome addition to the CDJ-2000 Nexus are the new quantize functions that snap the cue and loop points to the Rekordbox beat-grid. This means that triggered samples and loops will be in perfect time with the music, taking away any need to fiddle around with the loops or embarrassing kludges when triggering samples. From now one it is possible to download the setting of the CDJ-player with My Settings to iOS/Android devices, USB sticks or even SD memory cards to be recalled when a connection is made with a CDJ-2000 Nexus before they play a set.
More information about product
The DVJ-1000 is a digital turntable that is capable of playing back video data on DVDs, as well as CD-Audio, and MP3 audio on both CDs and DVDs.
In addition, the unit borrows several usability features from the current CDJ line, including a brighter fluorescent display on both the information screen and the central On-Jog display. Loop adjustment features are carried over as well, and a new automatic 4-beat loop feature has been included on this unit.
More information about product
The legendary turntable for 25 years as the best on the market! The original Technics direct drive motor with precision Quartz has long proven its worth. Because of its extreme durability and reliability, the SL-1200 evolved over the years to the tools of the professional DJ.
More information about product
Stops all vibrations from basses. The turntable can turn as it will, and wont be disturbed.
More information about product
The most notorious feedback turntable killers on the market, the MagLev DJ‘s, whereby 2 aluminum plates are magnetically held in place and make the turntable float.
The DJM-900 Nexus is a high performance digital mixer designed for today's professional DJ performers. An ideal combination with Pioneer's latest CDJ line of players, the DJM-900nexus offers a multitude of new features that includes a variety of onboard effects, increased sound quality, and direct PC connection to enable any DJ to perform to their utmost potential.
More information about product
The new flagship of the Pioneer mixing range, the DJM-2000 Nexus raises the bar, adding a host of new, intuitive features designed to make splicing tracks even more enjoyable. Featuring ProDJ Link LAN, the four channel mixer can seamlessly link up to as many CDJ’s and turntables - or even two laptops. Sync Master also puts the mixer at the heart of the operation, allowing it to set the master BPM for four CDJ’s, and Beat Slice gives users the power to dice and chop tracks in real time. Brought over from the old model, the new DJM-2000 Nexus also boasts a 5.8 inch multi touchscreen, but adds a Peak Limiter to eliminate distortion at high volume and a lower jitter DAC clock - ensuring performances are faultless.
More information about product
Introducing the world’s first reference audio and video combination mixer. In addition to mixing audio and video, the SVM-1000 mixer incorporates a built-in 11-inch LCD touch-panel display, symmetric channel layout, 4-channel audio and video inputs, Still Image Sampler and hundreds of combinations of video effects. Features and audio mixing capabilities of the SVM-1000 are similar to the industry standard Pioneer DJM-1000/800 mixers, which give DJs and VJs the creative freedom to easily build and create synchronized visual effects to accompany their audio mix for a complete entertainment encounter.
More information about product
The RMX-1000 takes a totally new direction to effectors and samplers delivering a 3-in-1 system comprising editing software, innovative performance hardware and VST/AU/RTAS plug-ins.
More information about product
A professional 24-bit DJ interface with studio grade phono pre-amps for superior sound. Extra auxiliary inputs and outputs allow for an optional third deck, recording or output for the SP-6 Sample Player or The Bridge.
More information about product
Traktor scratch A6 is the straight-up digital vinyl system for spinning MP3s using super-tight vinyl and CD control. The included Traktor AUDIO 6 interface, timecode vinyl and CDs, and the flagship Traktor software provide pro credentials.
More information about product
Hear better, perform better. Sennheiser monitoring systems are trusted by professionals worldwide and now are better than ever. Featuring an adaptive-diversity receiver, the receiver pack uses the headphone cable as a secondary antenna for flawless reception. Ear-canal phones, with various ear-fitting pads for an individual fit, reproduce the signal from the adaptive diversity receiver precisely and faithfully. Pass-through outputs allow easy splitting of the input signal to travel to other devices. The 5 band equalizer integrated in the transmitter also allows you to personalize the sound even further. Lastly, the entire set can be monitored and remotely controlled with Sennheiser's "Wireless Systems Manager" software due to the built-in Ethernet port on the stereo transmitter.
More information about product
The above list of materials is only a small part of our entire range.
Are you looking for something specific, please feel free to contact us!
Click here to contact B-Lighting!
The grandMA2 full-size represents MA Lighting's most powerful console and offers the control of conventional light, moving lights, LED fixtures and media from on one platform.
Its combination of the powerful grandMA software platform and the newest in hardware technology preserve the grandMA’s dominance as the ultimate programmer’s console. Like its predecessor, the grandMA2 offers programmers infinite flexibility to create the layouts and views they desire. This unique level of adaptability makes it the ideal console for all types of situations.
Whether you are controlling conventional or automated fixtures, video media, LED displays or other technology the grandMA2 offers intuitive and fast control. While the hardware has been optimized, the control philosophy and command line syntax have been retained. This makes the grandMA and grandMA2 consoles both downward and upward compatible.
The grandMA2 consoles can be part of a grandMA network and grandMA show files can be read and manipulated by grandMA2 consoles. Your hard-earned knowledge is future-proof!
More information about product
The MagicQ MQ100 Pro 2010 provides an immensely powerful control console in a compact size. Ideal for easy transport and fitting into small spaces, the MQ100 Pro 2010 is the console of choice for controlling lighting, video and LED.
Full theatre cue stack control on 10 different playback faders makes easy work of complex shows. Individual channel timing, fully configurable FX and on screen cue editing enables total artistic freedom. The on screen windows enable instant access to palettes, range information and FX for those moments when busking is required.
The MagicQ PC Wing is an extremely powerful USB control wing for connecting to your PC or Mac to control lighting, video and LED with the MagicQ PC software. MagicQ PC software runs under Windows, Linux or OSX. MagicQ PC software is free and uniquely the outputs are fully enabled, allowing you to run shows on up to 18 Universes.
The MagicQ PC Wing enables advanced show programming and playback through real faders, buttons and encoder wheels. The MagicQ PC wing enables easy access to moving light parameters via the 8 rotary encoders, and live show control through the 10 playback faders and cue stack control buttons. In additional there are 2 fully patchable direct DMX outputs on the rear panel.
Extend your MagicQ Console with one or more Playback wings. Each Playback Wing has two banks of 12 Playbacks, each individually paged. MagicQ Playback Wings connect to MagicQ Consoles via USB. No extra software required, just connect the Wing to the Console, enable the wing in the Console options and the Playbacks are ready to control your show.
More information about product
The MagicQ Execute Wing provides 48 additional Playbacks, consisting of 1 bank of 12 Playbacks with faders and 3 banks of 12 Playbacks with buttons. Each of the 4 banks has separate paging with dedicated Page Up and Page Down buttons.
The MA 2Port Node supplements the MA Lighting product range for networking and integrated system solutions and provides a tool for converting ethernet data to DMX data and vice versa.
More information about product
A ethernet network switch for 10/100 MBit applications. It features 48 programable network ports, and programmable static multicast routing. The network switch is to be used when needed to connect more than 2 Ethernet devices. Each CAT6e port has a Neutrik Ethercon connector and can be connected to a different network device, with up to 100m (300ft) of cable in between. A network device can be a computer (laptop), WiFi acces point (router), lighting console with Ethernet connection, DMX/Ethernet node, network audio device, …, or a next Ethernet switch to expand the system.
The Robe Robin 300E Spot light is a neat, punchy profile fixture with superior functions such as a large linear zoom and dynamic hot-spot control, ideal for a wide range of applications.
More information about product
The new Platinum FLX is an innovative full featured patent pending design 3-in-1 luminaire which can be utilized as a beam, spot, or wash fixture, featuring the brand new Philips MSD Platinum 20R 470W 80CRI lamp, 7,800K (0:51), 23,000 total lumens delivering comparable output to 1,200W fixtures
More information about product
Powerful and compact yet fully featured designs, the E Spot III is the third generation of LED moving heads. Ideal for small to medium size venues, these fixtures offer a wide array of quality features that will help push your imagination to the leading edge.
More information about product
The E SPOT LED II features a 60W 6,500K, Cool White Solid State LED engine, with greater output and 1/2 the power of a 150W discharge fixture.
More information about product
The Rayzor Beam 2R features the 132W Platinum 2R lamp, 3° sharp narrow beam.
More information about product
The new Rayzor Q12 features (12x) 15W Quad Color RGBW LEDs.
More information about product
The new Rayzor Q12 Zoom is a compact and fast wash lluminare featuring 15W Quad Color RGBW LEDs and a 13° to 29° motorized zoom.
More information about product
The Rayzor Q7 features (7x) 15W Osram Quad Color RGBW LEDs in a 7° beam.
More information about product
The VARI*LITE® VL3000 Spot luminaire sets new standards for imagery, beam control, color and brightness in spot luminaires. An upper enclosure houses the control electronics as well as the arc power supply for the 1200 watt short arc lamp. The arc power supply is power factor corrected for efficient power distribution.
More information about product
The VL2500 Spot luminaire comes complete with all of the qualities and options designers love from the original Series 2000 fixtures. It is still small, lightweight, and fast with a 700-watt shortarc lamp, impressive lumen output, and a zoom range from 18.5° to 42°.
More information about product
The VARI*LITE VL1000 deliver more than 15,000 lumens with the higher color temperature of the 575 watt arc source. These models also include a mechanical dimmer and a truss-mounted, fanless ballast.
More information about product
The VL3500 Wash luminaire has an output that exceeds 70,000 lumens as well as varied new options for color and beam control making it the standard by which all wash lights are measured.
More information about product
The VARI*LITE VL3000 Wash luminaire sets a new standard by combining 20,000 lumens of output with superior color and beam control in a wash luminaire.
More information about product
Back by popular demand, the VARI*LITE VL500D Wash luminaire is based upon the Emmy Award-winning VL5 Wash luminaire, but with significant design improvements. The patented and innovative DICHRO*TUNE radial color mixing system employs three sets of 16 radially mounted dichroic blades – magenta, blue, and amber – designed to produce a smooth, full spectrum of color cross-fades.
More information about product
Quasar is such a versatile product that just trying to imagine all that you can do with it would be a difficult task. To put it in a nutshell, this strobe can be used virtually anywhere that flash or constant light is required, from low-output applications to lightning effect. It is suitable for disco, theatre, stage, and rental company applications. And it can be controlled in four modes: DMX and SELF. All this is offered at a highly competitive price.
More information about product
Luxibel LX151, 1 meter bar with 40 pixels, controlled via Artnet which provides fast and easy assignment and control.
More information about product
American DJ with 18x 3-watt Tri Color LED's each rated at 60,000 hours in a 1 meter bar.
More information about product
Source Four the fixture that changed the lighting industry. Source Four combines the energy-saving power of the patented HPL lamp, with a dichroic reflector and optical-quality lenses, for the coolest beam on the market. That means your gels, patterns and shutters last longer and your performance space stays cooler.
More information about product
ADB C101 10°-65° with Ø 150 mm plano-convex lens and glass diffuser. ADB C103 7° - 61° with Ø 150 mm prism convex lens.
More information about product
The Studio Beam CDM/HCI-150 is a Spot with ballast. It has a high light-output (14.000 Lumen) and an extremely long lifetime (6000 H). This first-class PAR spotlight has an ultra-robust aluminum die-cast casing and an extensive set of glass lenses (narrow spot, spot and two medium flood). The Studio Beam has a highly reflective polished reflector insert and its colour frame accepts standard colour foils. A flexible mounting bracket allows precise positioning of this compact and easily transportable spotlight.
More information about product
The MWF330 is part of the Tempo 3 range. This is a range of compact, sturdy, general-purpose floodlights particularly suited to small- to medium-scale area or surface lighting. A high-grade asymmetrical reflector projects a highly efficient light beam. A universal mounting bracket allows ceiling, wall or surface mounting with a wide range of adjustment for both down- and uplighting. Tempo’s all-weather construction is designed for simple cleaning and speedy servicing. The main applications areas are façade, billboard, architectural lighting.
A compact, versatile and powerful blinder set. A GE 650 120V lamp is integrated into the compact housing. The two Blinders are connected to the break-outcable by dedicated connectors.
A par with different lenses, so that you can determine the beam angle yourself. Do you prefer a very tight effect bundle or a wide flood effect that illuminates a large surface? This Studio Beam 575 makes it possible.
A popular par armatures thanks to their stylish and characteristic shape. This Par 56 casing is a short type, with a black finish.
The Par 64 Long is an armature with a black finish that can be used for many purposes. The armature is fit for Par 64 lamps with a wattage of maximum 1,000 W.
The perfect PAR cans for decorative purposes. It's great for creating a bit of ambience on location.
Green flatcable H05RNH2-F2x1,5 (5mmx13mm). For outdoor use (IP44), lampholder with rubber-washer.
The ADB Micropack is a professional fully digital dimmer built in accordance with European safety standards EN 60950 and EN 60204. ADB Micropack is a member of a family of fully digital dimmerpacks, using advanced microprocessor control and an Application Specific Integrated Circuit designed by ADB. Digital control offers stable, accurate and repeated performance over time, without the periodical recalibration required by dimmers with analogue circuitry. The very straightforward menu-driven set-up provides maximum flexibility for a wide range of applications.
More information about product
The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available. Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards. The Betapack 3 range is available with MCB's per channel giving you peace of mind and maximum protection.
More information about product
The MAX 5000APS fog generator produces a very high volume of the finest fog available, with the longest hang time and the lowest fluid consumption. The MAX 5000APS is very similar to the MAX 3000APS, but operates at 208VAC and has dual outputs to create more than three times the fog output. The MAX 5000APS is also available as a self-contained portable version with a metal housing below the main generator unit for the storage of two special 3.3 pound Aluminum CO2 bottles.
More information about product
The MAX 3000APS is the standard model of the range. It is also available as a self-contained portable version with a metal housing below the main generator unit for the storage of a special 3.3 pound Aluminum CO2 bottle.
More information about product
The ATMOSPHERE APS is the standard model of the range. It is also available as a self-contained portable version, with a metal housing below the main generator unit for the storage of a special 3.3 pound Aluminum CO2 bottle.
More information about product
Diffusion haze is totally odorless and can only be detected visually. No sore throats, funny smells, or burning eyes. Safest, cleanest, and most efficient hazer for the entertainment industry. Provides safe and economical non-glycol haze with no heat. Fog Hang Time is over 3 hours in an enclosed space. No warm up period required.
More information about product
Z-1020, the most powerful DMX-controlled vertical pure fog machine which stands differently from the other Z-Series II. Its design is for special purposes and applications which you can¡¦t find in any fog machines available. It uses mirror-piping heater technology that supports advance features and high-throughout burst mode with its extreme low energy consumption. The Z-1020 can be position on the ground to spurt fog upward to have a column of fog effect or can be mounted on the wall to easily blend the surroundings with atmospheric effect.
More information about product
The AF-1 is a compact but powerful fan designed with clubs, studios, theatres and touring applications in mind. AF-1 features DMX input as standard and can be installed from the ceiling, in the truss, or can be floor standing.
More information about product
The above list of materials is only a small part of our entire range.
Are you looking for something specific, please feel free to contact us!
Click here to contact B-Lighting!
The Stagemaker electric hoists implements CE-certification chain and comply with the American CSA standard. The Stagemaker features and options, its compact design and on-going adaptability (R&D, close corporation with the entertainment industry) makes this system the best choice for your stage productions.
More information about product
The Stagemaker electric hoists implements CE-certification chain and comply with the American CSA standard. The Stagemaker features and options, its compact design and on-going adaptability (R&D, close corporation with the entertainment industry) makes this system the best choice for your stage productions.
More information about product
Legendary in performance, professional riggers around the world have come to rely on the CM Lodestar for the most demanding and challenging applications. Now, this iconic hoist is available as an economical 2-ton single-reeved unit that's ideal for a variety of lifting applications. And, because it's a single reeved unit, overall weight is decreased making it easier to transport and rig compared to a traditional double-reeved unit.
More information about product
ProLyft AETOS is the brand new ProLyft hoist range. The AETOS range is fully equipped to meet future demands in lifting equipment and offers clever features and carefully engineered product attributes.
More information about product
The S-serie has been developed as a heavy-duty system for use in the rental, stage building, event and exhibition markets. The S-serie truss has thick walled chords, heavy-duty bracing and an exceptionally strong coupler system (CCS7). This makes the Heavy-duty truss the ultimate truss for structures with high load bearing demands and high frequency usage. The S-serie truss can be used as supporting structure or overhead rig for more complex constructions. The comparatively compactness and ultimate strength make them suitable for outdoor use as well as indoor applications. Their user friendly design and durability combined with their high loading capacity make these trusses a flexible and reliable choice for many events.
More information about product
The S-serie has been developed as a heavy-duty system for use in the rental, stage building, event and exhibition markets. The S-serie truss has thick walled chords, heavy-duty bracing and an exceptionally strong coupler system (CCS7). This makes the Heavy-duty truss the ultimate truss for structures with high load bearing demands and high frequency usage. The S-serie truss can be used as supporting structure or overhead rig for more complex constructions. The comparatively compactness and ultimate strength make them suitable for outdoor use as well as indoor applications. Their user friendly design and durability combined with their high loading capacity make these trusses a flexible and reliable choice for many events.
More information about product
H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diagonals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble. More information about product
H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diagonals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble. More information about product
X30 truss is constructed of main tubes (51 x 2 mm) and diagonals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the X30 truss is fast and easy to assemble. More information about product
The ALP LM 750 serie is the classic among the Böcker ALP Lifts. Due to sophisticated quality these models impress by outstanding durability and unsurpassed durability. Böcker offers its LM series in four different models. Maximum lifting heights 7.50 m and a maximum payload of 300 kg. The ALP Lifts are equipped with four sturdy guide rollers. Each of them has a fixing brake for safe grip. For optimal protection during indoor and outdoor operation all models of the LM series can additionally be equipped with lateral outriggers. A convenient hand winch with integrated automatic brake control ensures precise and safe lifting of any kind of load.
More information about product
The SoftSteel has a normal outside webbing for soft slings, but instead of the polyamide core the SoftSteel has a core of steel wires. As flexible as a normal soft sling, the steel wires within the SoftSteel have a much better fire resistance. The SoftSteel can be used in circumstances where the normal soft slings are not allowed. The outside webbing is black, including a grey identification label and a cleverly hidden inspection window to inspect the steel wires within the SoftSteel. Available with a WLL of 2000 kg, the SoftSteel complies with all CE regulations and is BGV C1 approved.
More information about product
The above list of materials is only a small part of our entire range.
Are you looking for something specific, please feel free to contact us!
Click here to contact B-Lighting!
We have an extensive line of electrical cabinet. The cabinets are designed and built by The Powershop. This with the knowledge gained from there years of experience in the events industry. They have the following properties:
- Optimal protection
- Weatherproof
- Compact and lightweight
- Optimal shock and fall protection
Bals cables, sockets and power distributing. Since more than 50 years Bals Elektrotechnik manufactures industrial electrical products for the global market.
Lineax flexible cable is intended for installations with moving equipment, electric appliances and for building sites. The cable may be rated 0,6/1 kV where the installation has built-in protection and for motors in lifting appliances - machine tools - etc...
About renting equipment
All our equipment gets a technical inspections after rental and receives immediate service when there is damage, so it is always in perfect condition!
The list of materials is only a small part of our entire range. If you're looking for something specific, please feel free to contact us!